Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine

Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
scrap copper wire granulator General Introduction 
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobile 
wires, telecommunication wires, and other kinds of copper wires, in order to recover 
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..


scrap copper wire granulator Main Features: 
1.  No water needed, just put cable wires into the plant 
2.  Turnkey and compact type, PLC controller, 
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires


Final Copper&plastic granules output:
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine
copper separator machine Working Process: 
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine


 
copper cable granulator Technical Parameters: 
Model  Processing
capacity
Processed wire dia. Total power Voltage Dimension  Weight 
FC-400-1 80-120kg/h

0.3-20mm
11.92KW

customized
1.5*1.5*1.9m 750kg
FC-400 200-250kg/h 23.12KW 2.7*1.9*2.3m 1200kg
FC-600A 300-400kg/h 48.36KW 4*1.85*2.4m 3400kg
FC-600 300-400kg/h 52.36KW 4.3*1.95*2.4m 3400kg
FC-800 600-800kg/h 0.1-40mm 75.4KW 9.1*2.3*3.54m 8000kg
FC-1200 1000-1200kg/h 129.6KW 16*10*3m 12000kg

Different Models of copper separator machine: 
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine

Contact us freely for more detailed quotation. 
 
scrap copper wire granulator General Introduction 
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobile 
wires, telecommunication wires, and other kinds of copper wires, in order to recover 
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..


scrap copper wire granulator Main Features: 
1.  No water needed, just put cable wires into the plant 
2.  Turnkey and compact type, PLC controller, 
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires


Final Copper&plastic granules output:
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine
copper separator machine Working Process: 
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine


 
copper cable granulator Technical Parameters: 
Model  Processing
capacity
Processed wire dia. Total power Voltage Dimension  Weight 
FC-400-1 80-120kg/h

0.3-20mm
11.92KW

customized
1.5*1.5*1.9m 750kg
FC-400 200-250kg/h 23.12KW 2.7*1.9*2.3m 1200kg
FC-600A 300-400kg/h 48.36KW 4*1.85*2.4m 3400kg
FC-600 300-400kg/h 52.36KW 4.3*1.95*2.4m 3400kg
FC-800 600-800kg/h 0.1-40mm 75.4KW 9.1*2.3*3.54m 8000kg
FC-1200 1000-1200kg/h 129.6KW 16*10*3m 12000kg

Different Models of copper separator machine: 
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine
Automatic Operating Scrap Copper Cable Granulator Wire Recycling Machine

Contact us freely for more detailed quotation. 
 

Welcome you to choose our fast fitting/Fast Coupling, you could give us your request, we will recommend you the best solution of fast fitting. You will many many port size we made, no matter G thread or Npt thread, all you can request from us. We will do our best to give you best choice.

Normally our fast fitting is made of POM, with good appearance and high quality, and widely used on RO water treatment system, and also can be used on pneumatic or hydraulic industry, we welcome you getting samples from us. If you need other material fast fitting, no problem, you also can tell us, we can develop as your request.

IMG_5925

POM Fast Fitting

Pom Fast Fitting,Pipe Adapter,Quick Coupling,Plastic Fast Fitting,Fast Coupling

NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com